DIY Holiday Cards!

 

https://tattly.com/collections/peagreen-designs

Customize your own holiday cards with this simple DIY!

Here’s what you need: 

- Blank cards, preferably using thick-stock paper
- A pair of Tattly (or more, depending on your design)
Sponge
- X-acto knife

Step 1: Peel the plastic film off your Tattly. (We used Heart Chart by Peagreen Designs.) 

DIY Holiday Cards

Step 2: Place the Tattly face-down on your card. Please note that once you place the tattoo, the adhesive on the ink will stick a little and it may not be  removed easily. Make sure that you place it on a predetermined spot!

DIY Holiday Cards

Step 3: Use your sponge to carefully apply the Tattly to your card. Pro tip: the sponge should not be dripping wet as you only want water to get on the Tattly and not the rest of the card.

DIY Holiday Cards

Step 4: Peel the paper backing to reveal your design.

DIY Holiday Cards

Voila! 

DIY Holiday Cards

Step 5: If you want to include a Tattly inside the card as well, use an X-acto to cut out two corners to place your Tattly. 

DIY Holiday Cards

Ta da! 

DIY Holiday Cards

Add a greeting! 

DIY Holiday Cards

And you’re done! Repeat and send to your loved ones.

DIY Holiday Cards


Leave a comment

Please note, comments must be approved before they are published

Thanks for subscribing! You're the best!