DIY Stationery

 

Customize your own cards with this simple DIY!

Here’s what you need: 

- Blank cards, preferably using thick-stock paper
- A pair of Tattly (or more, depending on your design)
- Sponge
- X-acto knife

Step 1: Peel the plastic film off your Tattly. (We used Heart Chart by Peagreen Designs.) 

Step 2: Place the Tattly face-down on your card. Please note that once you place the tattoo, the adhesive on the ink will stick a little and it may not be  removed easily. Make sure that you place it on a predetermined spot!

Step 3: Use your sponge to carefully apply the Tattly to your card. Pro tip: the sponge should not be dripping wet as you only want water to get on the Tattly and not the rest of the card.

Step 4: Peel the paper backing to reveal your design.

Voila! 

Step 5: If you want to include a Tattly inside the card as well, use an X-acto to cut out two corners to place your Tattly. 

Ta da! 

Add a greeting! 

And you’re done! Repeat and send to your loved ones.